2970lb Precast Concrete Formwork Shutter Cover Magnetic Shuttering Magnet for Wholesale Sale

Basic Info

Certificate	ISO9001:2015
Monthly Capacity	10000PCS
Composite	Rare Earth Magnet
Shape	Sheet
Delivery Time	7-20days Depends on Quantities
Size	Bilateral:10.04"X3.82"X1.73" Unilateral:10.24"X3.8
Weight	8.4lb
Transport Package	Carton or Customized
Specification	2970lb
Trademark	CS or customized
Origin	Ningbo
Production Capacity	100000

Product Description

<sup>Supply Ability
Supply Ability 10000 Piece/Pieces per Month

Packaging & Delivery
Packaging Details : PALLET/CTN
Port : NINGBO</sup>

Lead Time:

Quantity(Pieces)	1 - 100	>100
Est. Time(days)	7-20	To be negotiated

Product Description

Model No	Shuttering Magnet	Weight	4.4KG
Surface Treatment	Polishing	Warranty	1year
Certificate	ISO9001:2015	Shape	Sheet
Monthly Capacity	10000PCS	Tolerance	±1%
Composite	Rare Earth Magnet	Transport Package	Carton or Customized
Trademark	CS or customized	Origin	Ningbo
Specification	450-3000KG	Delivery Time	7-25days Depends on Quantities

Detailed Photos Main uses and characteristics
The prefabricated concrete formwork fixing magnetic box is a magnetic fixing device developed for fixing the prefabricated concrete formwork. Compared with the traditional mechanical fixing methods such as screws and nuts, the magnetic box fixing has the characteristics of half fast, flexible operation and good holding force, which is conducive to improving labor efficiency. Therefore, it has been applied in the prefabricated concrete production line abroad.

When the magnetic box is in the working state, the suction surface at the bottom of the magnetic block is closely attached to the precast concrete production platform for firm suction; When the lever is used to pry up the magnetic block, most of the magnetic force is shielded by the magnetic box, and the magnetic force at the bottom is greatly reduced. The magnetic box can be easily removed from the platform by hand. usage method

(1) There is a magnetic control rod (magnetic control switch) on the shuttering magnet. Place shuttering magnet on the platform, press the switch, and shuttering magnet will firmly absorb the platform and be in working state; When the lever is used to pry the switch, the suction between shuttering magnet and the platform is greatly reduced, and shuttering magnet is closed, so shuttering magnet can be moved.

(2) The thickness and surface flatness of the platform will affect the suction between shuttering magnet and the platform. The thicker the platform, the smoother the surface, the greater the suction, and the lateral shear force is related to the suction of shuttering magnet and the friction coefficient of the contact surface.

(3) There are two fixing screws at both ends of shuttering magnet , which can be connected with different fixtures to fix side molds with different shapes and structures, such as angle steel, channel steel side molds, etc.

(4) shuttering magnet uses strong magnetism. Theoretically, the magnetic force can be maintained on the premise of not exceeding the working temperature and not damaging the rusted magnet itself.

(5)Environmental conditions for the use of shuttering magnet : 1. The ambient temperature shall not be greater than 80 ºC. 2. The surrounding medium shall be free of corrosive agents that corrode metals. Maintenance and instructions

(1) During the use of the magnetic box, the deformation of the magnetic control box and even the damage of the magnet caused by knocking and bumping with hard tools shall be prevented, so as not to affect the service performance. If tools are to be used, it is recommended to tap gently with a rubber hammer.

(2) The platform for using the magnetic box shall be kept clean and flat to prevent iron filings or concrete slurry from entering the magnetic box, which will affect the flexibility of the switch. At the same time, it may cause the magnetic block to tilt and cannot fit the platform smoothly, so as to weaken the working suction.

(3) The magnetic box shall not be close to instruments, electronic instruments and other devices vulnerable to magnetic force. At the same time, it shall not be close to other ferrous materials. Once adsorbed, it will be difficult to separate. It is recommended to place the magnetic box and other magnetic holders in the toolbox.

(4) The holding surface of the magnetic box shall be kept clean and flat. If it is not used for a long time, the holding surface shall be oiled for rust prevention. Frequently check whether the magnetic block can fit the platform smoothly and whether the switch is flexible without affecting the normal use.Exhibition

Certifications

Packaging & Shipping